NM BURNER is designed to meet with a wide turndown ratio, and has a short flame and high combustion capacity. It doesn't have a back fire, because gas and air are mixed inside burner.

Combustion Capacity: 40,000~3,210,000 (Kcal/Hr)
Shape of Flame: Short flame
Working Temp.: 1400℃ reachable
Applications: • Hardening furnace
      
Extending press stove
       Heat treatment furnace
       Heating furnace
      
Hot air generator
  ---------------------------------------------------------------------------------------------------------------------------------------
EA BURNER is one kind of burner that gas and air are mixed in the nozzles' top, and designed specially for excess air. Also, it has the stable combustibility between low and high combustions.

Combustion Capacity: 30,000~1,500,000 (Kcal/Hr)
Shape of Flame: Long flame
Working Temp.: 1400℃ reachable
Applications: Heating furnace
      
Heat treatment furnace
      
Hardening furnace
       Revolving furnace
      
Reverberatory
      
Hot air generator
      
Furnace for melting glasses

-----------------------------------------------------------------------------------------------------------------------------------------
FB BURNER is one kind of burner having high speed-returning airflow mixed in nozzle and flat flame likes magnetic piece. It is suitable for heating for large area.

Combustion Capacity: 120,000~910,000 (Kcal/Hr)
Shape of Flame: Flat flame
Working Temp.: 1200℃ reachable
Applications:• Heater of Bullet type
      
Plating furnace for melting zinc
      
Hardening furnace


-----------------------------------------------------------------------------------------------------------------------------------------
TB BURNER is one kind of pre-mixed burner having the feature of safety combustion, because of complete combustions. Having the circular and long hole, so there is no necessary to worry to get problems of back fiire.

Combustion Capacity: 12,500~410,000 (Kcal/Hr)
Shape of Flame: Neutral flame
Working Temp.: 1200℃ reachable
Applications: Heating furnace
       
Furnace for melting glasses

-----------------------------------------------------------------------------------------------------------------------------------------

HS BURNER is one kind of nozzle-mixing burner for excess air, and sends air and gas into the interior of burner by high speed. It is designed to use flowing speed up to 90m/sce to let flame be gushed centrally.

Combustion Capacity: 60,000~690,000 (Kcal/Hr)
Shape of Flame: High-speed flame
Working Temp.: 1400℃ reachable
Applications: Heating furnace
       Heat treatment furnace
       Heating furnace for Aluminum and Steel plates


-----------------------------------------------------------------------------------------------------------------------------------------
RB BURNER is the design can let flame centralized under radioactive rays. In the interior of cone, there is nearly complete combustion, therefore it is compulsory burner that could carry heat radiation rate out highly.

Combustion Capacity: 30,000~700,000 (Kcal/Hr)
Shape of Flame: Straight-moving flame
Working Temp.: 1200℃ reachable
Applications: Heating furnace for steel plate
       
Hardening furnace
       
Salt bath furnace


-----------------------------------------------------------------------------------------------------------------------------------------
P BURNER has the chip of ignition, Mixer, Zero governor and Cock may adjust gas and air, this is a special designed pilot burner having extremely stable flame.

Combustion Capacity: 2,000~150,00 (Kcal/Hr)
Applications: For Pilot
      
For small type heating

----------------------------------------------------------------------------------------------------------------------------------------
 
Suitable fuel: Each kind of gas like  LP gas, Natural gas, Town gas… and so on.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------